High Speed
Overhead Doors

The DYNACO SlimLine Stainless door is engineered to provide safe, quiet and efficient area separation where high cycle operation and sanitation are critical.

Full stainless steel construction and a state of the art wash-down drive system provide years of reliable service in demanding hygienic applications. High speed operation, ultra tight seal and soft curtain technology assure outstanding environmental control as well as safety for pedestrians and equipment.

Easy Cleaning / Sanitary Design

USDA/FDA compliant curtain is smooth and free of mechanical components which can trap contamination. #304 stainless steel construction and wash-down drive system makes cleaning and maintaining a sanitary environment simple.

Safety First

With a DYNACO door, your safety is assured. Infrared photo-eyes and a wireless sensing edge reverse the door automatically if an obstruction is detected or contacted. Our soft bottom edge curtain is free of heavy, rigid components thus protecting users and equipment from common hard edge accidents. Our OPTIONAL EGRESS FEATURE provides additional safety for your employees in an emergency.

Energy Savings

Installing a DYNACO door saves energy! Its high speed operation and industry leading seal significantly reduce unwanted air transfer saving you money hour after hour.

Click here to download our DYNACO Slimline Stainless information sheet.

Engineered specifically for freezer applications, the DYNACO M2 Freezer door provides the industry’s fastest return on investment and lowest life cycle cost.

This energy saving door system minimizes convection, conduction and infiltration energy loss. Faster cycle speeds (up and down), an insulated curtain (optional) and tighter seals around the perimeter reduce loss of cold air. All of this is accomplished without compromising speed or safety.

Fast Speed

Significantly reduces energy costs due to lost temperature control; dramatically improves productivity and safety.

Insulation

An insulated door curtain consisting of two layers of PVC filled with insulating material can be specified to reduce convection.

Tight Seal

On all four sides of the opening minimizes infiltration, inhibits water, dust, pests and other contaminants.

Click here to download our DYNACO M2 Freezer information sheet.

The Streamline Door provides outstanding environmental control through the use of state of the art technology. A sleek, attractive exterior houses patented components designed for maximum performance with minimal noise and clearance issues.

Designed for applications where cleanliness and/or aesthetics are critical, the Streamline incorporates smooth composite materials virtually free of exposed fasteners. Ultra quiet operation and soft curtain technology assure safety and comfort. Streamline doors are designed for interior only environments to 0.82 lbft2 and have a maximum standard dimension of 14’x14’.

Integrated Motor Design

The patented “In Tube” motor design reduces lateral spacing and allows door speeds up to 120” sec. The drive system utilizes soft start/stop technology, an absolute encoder and dynamic breaking, eliminating maintenance prone limit switches and brakes.

Side Guides And Seals

Side guides are formed from galvanized structural shapes with a curved composite cover. Covers attach to the frames without the use of exposed fasteners. Inner side guides are extruded, self-lubricating UHMW that mold around the bead leaving a maximum air gap of 0.017”. Conventional weather-strip systems that are prone to wear and damage are eliminated.

Safety

DYNACO’s exclusive soft curtain design prevents hard edge accidents. No stiffeners or rigid components to injure workers or damage equipment. A wireless reversing edge and built-in infrared sensors protect against downward accidents.

Click here to download our DYNACO Streamline information sheet.

The Slimline Techno door is designed for interior environments, providing a high-tech, safe, and aesthetically pleasing door for even the most demanding customers. The Slimline Techno combines our proven control and drive system, with our specially modified bead sealing technology, for ultra-smooth, ultra-quiet operation.

Incorporating DYNACO’s exclusive DYNALOGIX II controls, with a variable frequency drive, provides maximum performance, flexibility and self-diagnostic capabilities for technology driven environments. The Slimline Techno will operate with a difference in pressure of up to 0.82 lbs/sq.ft(winds of 10 MPH indicative, not including any multiplication coefficients, and taking into account the configuration of the building).

Safety First

With a DYNACO door, your safety is assured. Infrared photo-eyes and a wireless sensing edge reverse the door automatically if an obstruction is detected or contacted. Our soft bottom edge curtain is free of heavy, rigid components thus protecting users and equipment from common hard edge accidents. Our OPTIONAL EGRESS FEATURE provides additional safety for your employees in an emergency.

Energy Savings

Installing a DYNACO door saves energy! Its high speed operation and industry leading seal significantly reduce unwanted air transfer saving you money hour after hour.

Superior Seal

The patented side guides and tight seal keep out unwanted contamination and eliminate wear prone weather-strip systems.

Click here to download our DYNACO Slimline Techno information sheet.

Designed for interior and exterior applications to 324 ft2, DYNACO Power M2 doors provide reliable environmental control while increasing productivity and safety. The door is designed to guard against the harshest environmental conditions thus preventing the infiltration of dirt, contaminants, snow, rain, and wind.

Incorporating patented “Push Pull” gear drive technology, the Power M2 operates at higher open and close speed than gravity doors, therefore providing better environment control and energy conservation. Further, the door operates and resists wind and pressure without the need for weighted or rigid components, reducing maintenance and increasing safety.

Door Operation

Gear driven “Push-Pull” system positively drives the curtain both directions, eliminating maintenance and damage prone tension systems, wind stiffeners and bottom bars.

High Wind Load Resistance And Operation

Patented “Push Pull” drive locks are attached to the end of the curtain material and run continuously along the full height of the door, providing operation in pressures up to 95 mph. (refer to specifications for additional information)

Safety Engineered

Each door panel comes standard with a unique soft curtain, which prevents many hard edge accidents. No stiffeners or rigid bottom bars to injure workers of damage equipment. A wireless reversing edge and built-in infrared sensors protect against 4 different types of accidents.

Click here to download our DYNACO Power M2 information sheet.

The DYNACO S731 High Performance Door is specifically designed for abusive environments where uninterrupted functionality, reliability and performance is critical to maintaining maximum workflow, environmental control, safety and efficiency.

This DYNACO S731 combines the extreme durability with a refined design, improved aesthetics and the proven reliability of the DYNACO DYNALOGIX II control system. Together, the robust systems and design provide years of reliable high performance.

Superior Seal Means Performance Under Extreme Pressure

Our patent pending continuous wind-lock sealing system withstands static wind pressure of up to 130 mph. The continuous wind lock design provides greater wind resistance and durability while eliminating the need for wind bar systems.

Self-reinserting

In the event of an accidental hit to the door, the curtain assembly will release from the side columns without damage. A simple push of a button will cause the curtain to re-insert itself, thus maintaining consistent operation.

Composite Bottom Bar

Unlike conventional formed steel or extruded aluminum bottom bars, the DYNACO S731 composite bottom bar is resistant to damage or corrosion.

Click here to download our DYNACO S731 information sheet.

The DYNACO S-631 Rigid is designed for medium sized inside and outside applications requiring extra security. The side posts are designed to resist windloads and protect against intruders.

The unique DiscDrive technology enables quick replacement of the impacted lamellas after collision, minimizing downtime. The DYNACO S-631 Rigid provides environment control and savings on energy costs. Its operating speed improves your traffic flow.

Discdrive Technology

Unique door drive system with increased longevity. Door remains operational even when a lamella has been removed after impact.

Easy Lamella Replacement

Lamellas can be individually replaced in a few minutes. No expensive repairs, minimal downtime.

Flexible Aluminium Lamellas

The flexibility of the aluminium lamellas can absorb light impact.

Click here to download our DYNACO S-631 information sheet.

Specifically designed for exterior applications, the DYNACO All Weather M2 is engineered for high cycles, extreme weather and high wind loads. The All Weather M2 incorporates patented push pull technology, pivoting side guides, soft edge technology, self-reinsertion and industrial quality controls.

Combined, the systems provide maximum performance and safety for high-pressure applications. The All Weather M2 can be mounted interior or exterior to the building and is available with a wide variety of optional equipment. The door is free of rigid components and conventional weatherstrip systems. Thus reducing maintenance cost and improving energy efficiency.

Patented Drive System

“Push-Pull” technology incorporates a gear drive system, which eliminates rigid components and allows for reliable open and close under pressure.

Patented Side Frame Assembly

Capable of handling wind loads of up to 32 psf, the side guide is spring-loaded and pivots. This allows operation under pressure and reduces wear and tear.

Encapsulated Guide

The inner guide is constructed of durable UHMW, which reduces wear and friction. The guide is re-enforced with a steel channel, providing continuous wind resistance along the full height of the door. The encapsulated design provides superior seal while eliminating conventional weather-strip systems.

Click here to download our DYNACO All Weather M2 information sheet.